Online Store Policies

IMERC State Restrictions'

Due to mercury-added products being banned or phased out in some states, MDI cannot ship Mercury added products (Relays, Switches and Floats) to the following IMERC states:
Connecticut (CT), Minnesota (MN), Maine (ME), Massachusetts (MA), New Hampshire (NH), New York (NY), Rhode Island (RI), or Vermont (VT)

These states belong to the Interstate Mercury Education and Reduction Clearinghouse (IMERC) group, which have these restrictions.

Exemptions are currently being applied for in cases where Mercury Relays and Switches are being used to replace relays and switches in equipment originally manufactured with Mercury Relays and Switches. But, currently, MDI cannot ship into these states.

Warranty Policy

During the time periods and subject to the conditions hereinafter set forth, MDI will repair or replace to the original user or consumer, any portion of your new MDI product which proves defective due to defective materials or workmanship of MDI. At all times, MDI shall have and possess the sole right and option to determine whether to repair or replace defective equipment, parts or components. Damage caused by acts of God or conditions beyond the control of MDI will not be covered by this warranty.

Warranty Period:

  • 1 year warranty on all MDI manufactured items (Unless item states otherwise).
  • 90 day warranty on all resale items.
  • For Pumps Only
    • Start-up reports are required to support warranty pump claims. Warranty effective only if MDI supplied or authorized control panels are used. Single phase pumps must utilize MDI supplied start components.

This Warranty Will Not Apply:

  1. To defects or malfunctions resulting from failure to properly install, operate or maintained the product in accordance with printed instructions provided.
  2. To failures resulting from abuse, accident or negligence.
  3. To normal maintenance services and the parts used in conjunction with such service.
  4. To products which are not installed in accordance with applicable local codes, ordinances and good trade practices.
  5. The product is used for purposes other than for what is was designed and manufactured.
  6. If 3 phase motors are installed on a single phase power supply using a phase converter or if 3 phase power is supplied by only two transformers, making an open Delta system.

Warranty Exclusions:

MDI specifically disclaims the implied warranties of merchantability and fitness for a particular purpose after the termination of the warranty period set forth herein. No warranties or representations at any time made by any representatives of MDI shall vary or expand the provision hereof.

Liability Limitation:

In no event shall MDI be liable or responsible for consequential, incidental or special damages resulting from or related in any manner to any MDI or resale product or parts thereof. Personal injury and/or property damage may result from improper installation. MDI disclaims all liability, including liability under this warranty, for improper installation. MDI recommends following the instructions in the installation manual. When in doubt, consult a professional. Some states do no allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Labor, ETC., Costs:

MDI shall in no event be responsible or liable for the cost of field labor or other charges incurred by any customer in removing and/or reaffixing any MDI product, part or component thereof or any temporary pumping of other equipment.

Returned or Replaced Components:

Any item to be replaced under this Warranty must be returned to MDI, or such other place as MDI may designate, freight prepaid.

This warranty gives you specific legal rights and other rights which may vary from state to state.

In the absence of suitable proof of this purchase date, the effective date of this warranty will be based upon the date of manufacture.
Example: 1501 = Year-Week = 1st Week of 2015.

Free Ground Shipping Details

  • Free Ground shipping on orders over $300
  • Offer valid in the contiguous U.S. Only.
  • Does not include Saturday delivery.
  • Offer not retroactive on prior purchases.
  • Limited time offer
  • Not applicable to sale or discounted items
  • Does not apply to any quotes or quote item

Exceptions: Due to dimension and weight limitations assessed by UPS, orders made with an extraordinary amount of weight or large dimensions may be subject to a freight charge. A large quantity of weight kits, for example, may require a freight charge. Please call (800) 634-4077 or contact us if you think you may be placing an order that could incur a shipping charge. We will confirm if your order does need a freight charge and can supply you with a shipping cost for your purchase at that time. If you are wanting your items shipped outside of the contiguous U.S. please call.

Back Ordered Items

After your initial shipment of in stock items are sent, all remaining back ordered items are shipped free of charge. If all items are out of stock when you submit your order, you are responsible for the initial shipping charge. If we receive a portion of the order we will ship those items at the original cost of shipping and the remaining back ordered items will ship at no cost to you.

The method of shipping will depend on the best option available. Back ordered items will ship either First Class Mail or UPS Ground. If you would like your back ordered items to be sent out using a specific shipping method you will need to contact us at (800) 634-4077. You will be charged for the cost of shipping your back ordered items if any other method is chosen. Typically, back ordered items, if not sent out the same day, will go out the following day. Travel time will depend on your location within the continental US. Please be advised, unless otherwise notified all back ordered items will be sent via First Class Mail or UPS Ground.

Back ordered items will ship out once they are in stock.

Made to Ordered Items

At Mercury Displacement Industries Inc (MDI) most of our items are made to order in our Michigan facility. We ask for 4-10 business days after receiving your order to complete production. If there are longer lead times than this it will be communicated with you efficiently.

Made to Order items will ship out once the entire order is complete. Partial orders will not be shipped unless communicated with MDI.

Returns and Exchanges

In the event that you would like to exchange or return an item please refer to return form here. MDI does not accept used items for return or exchange. Please use the original packaging your items come to you in to send back to MDI. Once received, per our approval, you will be issued a refund, less the appropriate restocking fee. If you have a question that your invoice does not address please call and speak with a customer service representative who will give you return information specific to the product you are returning.

Returns and Warranties Return Items To:
Mercury Displacement Industries
Attn: Returns Department
25028 U.S. 12 East
Edwardsburg, Michigan, 49112

All customers will be responsible for shipping charges on returned product.

You have 30 days to return an item.

There is a 50% restocking fee on all Custom Made items. This includes all items that are made special, not a standard part.

There is a 25% restocking fee on all Made to Order and Resale items, this includes standard items not stocked.
Made to Order items will be shown at checkout.
Resale items are any item order from another company (Champion, Dwyer, Flo-Pro, etc).

There is a 15% restocking fee on all other items.

***Please make sure to record your tracking number.***
Please use our Returns & Exchange form. You can download it here.

Privacy Policy

This privacy notice discloses the privacy practices for MDI. This privacy notice applies solely to information collected by this web site. It will notify you of the following:

  1. What personally identifiable information is collected from you through the web site, how it is used and with whom it may be shared.
  2. What choices are available to you regarding the use of your data.
  3. The security procedures in place to protect the misuse of your information.
  4. How you can correct any inaccuracies in the information.

Information Collection, Use, and Sharing

We are the sole owners of the information collected on this site. We only have access to/collect information that you voluntarily give us via email or other direct contact from you. We will not sell or rent this information to anyone.

We will use your information to respond to you, regarding the reason you contacted us. We will not share your information with any third party outside of our organization, other than as necessary to fulfill your request, e.g. to ship an order.

Unless you ask us not to, we may contact you via email in the future to tell you about specials, new products or services, or changes to this privacy policy.

Your Access to and Control Over Information

You may opt out of any future contacts from us at any time. You can do the following at any time by contacting us via the email address or phone number given on our website:

  • See what data we have about you, if any.
  • Change/correct any data we have about you.
  • Have us delete any data we have about you.
  • Express any concern you have about our use of your data.

Security

We take precautions to protect your information. When you submit sensitive information via the website, your information is protected both online and offline.

Wherever we collect sensitive information (such as credit card data), that information is encrypted and transmitted to us in a secure way. You can verify this by looking for a closed lock icon at the bottom of your web browser, or looking for "https" at the beginning of the address of the web page.

While we use encryption to protect sensitive information transmitted online, we also protect your information offline. Only employees who need the information to perform a specific job (for example, billing or customer service) are granted access to personally identifiable information. The computers/servers in which we store personally identifiable information are kept in a secure environment.

Updates to Privacy Policy

We may make updates to this Privacy Policy periodically without notification. Please refer to this policy when necessary to check for updates.

If you feel that we are not abiding by this privacy policy, you should contact us immediately via telephone at (800) 663-8574 or contact us.

  • Our site is fully SLL secured through ESET SSL Filter CA
SSL Certificate
SSL Certificate


Accept Credit Cards

PayPal Acceptance Mark