Pilot Duty | Control Floats - N Series
These high quality float switches are designed for pilot duty (1/4 Horse Power) loads and control panels.
- The floats have 3 power connection options:
- Skived Ends Where the insulated wire leads inside the cable are intended to be wired into other system components inside a junction box.
- 120 VAC Piggyback Plug Where no junction boxes or complicated electrical connections are needed. Plug the switch into a standard 120 VAC outlet, and plug your pump into the piggyback plug.
- 240 VAC Piggyback Plug Where no junction boxes or complicated electrical connections are needed. Plug the switch into a standard 240 VAC outlet, and plug your pump into the piggyback plug.
Please see below for Ratings, Operating Angle, or Cord Type Options
- Ratings:
- 10 AMP @ 120/240 VAC
- 1/4 H.P. @ 120/240 VAC
- 34.8 LRA
- Operating Angle: Narrow Angle
- Contacts close 25° above horizontal
- Contacts open 10° below horizontal
- Operation Options:
- Normally Open (Pump Down)
- Normally Closed (Pump Up)
- Double Throw (SPDT)
- Cord Options:
- 16 AWG Black SJOW
- 18 AWG Black SJOW
Possible Markings
Available in the Avocado Shaped float package.
SpecSheets
N-Series Control Float Details (Pilot Duty | Control Panel)